Mende Cindezela

Incazelo emfushane:

Stainless Steel Belt for wood based panel press | continuous Mende press.


  • Ziyisivikelo Isicelo: Izinkuni Ezisekelwe Panel Imboni
  • Uhlobo Cindezela: Okuqhubekayo Mende Cindezela
  • Steel Belt: MT1650
  • Steel Uhlobo: Engagqwali
  • Amandla eqine: 1600 MPA
  • Ukukhathala Amandla: ± 630 N / mm2
  • Ukuqina: 480 HV5
  • umkhiqizo Imininingwane

    Datasheets

    Steel ibhande zibe yizinkuni Panel EZISEKELWE INDUSTRY | Mende Press

    Mingke Steel Belts can be applied to wood based panel (WBP) industry for continuous presses to produce Medium Density Fiberboard (MDF), High Density Fiberboard (HDF), Particle Board (PB), Chipboard, Oriented Structural Board (OSB), Laminated Veneer Lumber (LVL), etc.

    Compared with the double belt press, Mende press is an old type of press. It uses a stainless steel belt with thickness of 1.8 ~ 2.0mm. Its working principle is similar to that of a rubber drum vulcanizer (Rotocure). During the operation of the equipment, the steel belt is constantly folded back and forth at high speed. Such bending procedure requires extremely high strength (tensile, yield, fatigue) of the steel belt. In China, Mingke MT1650 steel belts are running on most of the Mende press lines.

    Ngo ukhuni based panel umkhakha, kukhona izinhlobo ezintathu ukucindezela okuqhubekayo :

    ●   Double Belt Cindezela, ikakhulukazi ukukhiqiza MDF / HDF / PB / OSB / LVL / ...

    ●   Mende Cindezela (okuyinto yaziwa nangokuthi Calender), ikakhulukazi ukukhiqiza MDF mncane.

    ●   Single Opening Press, mainly produce PB/OSB.

    Kuwo wonke umhlaba, abakhiqizi adumile okuqhubekayo cindezela yilezi:

    ● SIEMPELKAMP, evela eJalimane

    ● DIEFFENBACHER, evela eJalimane

    ● DIEFFENBACHER-SWPM, kusukela China

    ● foma, kusukela China

    ● BINOS, evela eJalimane

    ● IMAL PAL, wase-Italy

    Kusebenza Steel Amabhande:

    Model Uhlobo ibhande Uhlobo cindezela
    ●   MT1650 ●   MT1500 Martensitic Engagqwali Belt ibhande Double pressMende cindezela
    ●   CT1300 Lukhuni futhi omnene carbon steel Single ukuvulwa cindezela
    ●   DT1320 isigaba Dual carbon steel (ehlukile ukuze CT1300) Single ukuvulwa cindezela

    Yethula Ububanzi Amabhande:

    Model ubude ububanzi Ubukhulu
    ●   MT1650 ●   MT1500

    ≤150 m / pc

    1400 ~ 3100 mm 2.3 / 2.7 / 3.0 / 3.5mm
    ●   CT1300 1.2 / 1.4 / 1.5 mm
    ●   DT1320 1.2 / 1.4 / 1.5 mm

  • Previous:
  • Okulandelayo:

  • ● Datasheet _ MT1650 Stainless Steel Belt  ☚ uchofoze ukuze ulande

    ● Datasheet _ MT1500 Stainless Steel Belt  ☚ uchofoze ukuze ulande

    ● Datasheet _ MT1050 Stainless Steel Belt  ☚ uchofoze ukuze ulande

    ● Datasheet _ AT1200 Stainless Steel Belt  ☚ uchofoze ukuze ulande

    ● Datasheet _ AT1000 Stainless Steel Belt  ☚ uchofoze ukuze ulande

    ● Datasheet _ CT1300 Carbon Steel Belt  ☚ uchofoze ukuze ulande

    ● Datasheet _ CT1100 Carbon Steel Belt  ☚ uchofoze ukuze ulande

    ● Datasheet _ DT1320 Carbon Steel Belt  ☚ uchofoze ukuze ulande

    ● Datasheet _ DT980 Stainless Steel Belt  ☚ uchofoze ukuze ulande

    Bhala umyalezo wakho lapha futhi ulithumele kithi