Nikan Yoo si Press

Kukuru Apejuwe:

Carbon Steel Belts for wood based panel press | Continuous single opening press


  • Igbanu Ohun elo: Wood Iranlowo Panel
  • Iru ti Tẹ: Lemọlemọfún Nikan Yoo si Press
  • Irin igbanu: CT1300 / DT1320
  • Irin irú: Erogba, irin
  • Fifẹ Okun: 1250/1340 Mpa
  • Rirẹ Okun: ± 430 / ± 410 N / mm2
  • Líle: 360/380 HV5
  • ọja Apejuwe

    Datasheets

    Irin igbanu fun igi DA nronu ise | Nikan šiši Tẹ

    Mingke Steel Belts can be applied to wood based panel (WBP) industry for continuous presses to produce Medium Density Fiberboard (MDF), High Density Fiberboard (HDF), Particle Board (PB), Chipboard, Oriented Structural Board (OSB), Laminated Veneer Lumber (LVL), etc.

    Single Opening Press is an old-fashioned design, using a carbon steel belt with a thickness of 1.2 ~ 1.5mm, which has good thermal conductivity and low cost. Mingke carbon steel belt that used in single opening press line has a service life of more than 10 years.

    Ni igi orisun nronu ise, nibẹ ni o wa mẹta orisi ti lemọlemọfún leralera :

    ●   Double igbanu Press, o kun gbe awọn MDF / HDF / PB / OSB / lvl / ...

    ●   Mende Press (eyi ti o ti tun mo bi Calender), o kun gbe awọn tinrin MDF.

    ●   Single Opening Press, mainly produce PB/OSB.

    Gbogbo ayika aye, awọn gbajumọ lemọlemọfún tẹ tita ni o wa:

    ● SIEMPELKAMP, lati Germany

    ● DIEFFENBACHER, lati Germany

    ● DIEFFENBACHER-SWPM, lati China

    ● FOMA, lati China

    ● BINOS, lati Germany

    ● IMAL PAL, lati Italy

    Wulo, Irin beliti:

    awoṣe Iru ti igbanu Iru ti tẹ
    ●   MT1650 Martensitic Alagbara, Irin igbanu Double belt press, Mende press
    ●   MT1500 Martensitic Alagbara, Irin igbanu Double belt press, Mende press
    ●   CT1300 Àiya ki o tempered erogba, irin Nikan šiši tẹ
    ●   DT1320 Meji alakoso erogba, irin (ni yiyan si CT1300) Nikan šiši tẹ

    Ranse Dopin ti awọn beliti:

    awoṣe ipari iwọn sisanra
    ●   MT1650 ≤150 m / pc 1400 ~ 3100 mm 2.3 / 2.7 / 3.0 / 3.5mm
    ●   MT1500 2.3 / 2.7 / 3.0 / 3.5mm
    ●   CT1300 1.2 / 1.4 / 1,5 mm
    ●   DT1320 1.2 / 1.4 / 1,5 mm

     


  • Ti tẹlẹ:
  • Next:

  • ● Datasheet _ MT1650 Stainless Steel Belt  ☚ tẹ lati gba lati ayelujara

    ● Datasheet _ MT1500 Stainless Steel Belt  ☚ tẹ lati gba lati ayelujara

    ● Datasheet _ MT1050 Stainless Steel Belt  ☚ tẹ lati gba lati ayelujara

    ● Datasheet _ AT1200 Stainless Steel Belt  ☚ tẹ lati gba lati ayelujara

    ● Datasheet _ AT1000 Stainless Steel Belt  ☚ tẹ lati gba lati ayelujara

    ● Datasheet _ CT1300 Carbon Steel Belt  ☚ tẹ lati gba lati ayelujara

    ● Datasheet _ CT1100 Carbon Steel Belt  ☚ tẹ lati gba lati ayelujara

    ● Datasheet _ DT1320 Carbon Steel Belt  ☚ tẹ lati gba lati ayelujara

    ● Datasheet _ DT980 Stainless Steel Belt  ☚ tẹ lati gba lati ayelujara

    Kọ ifiranṣẹ rẹ nibi ati ki o ran si wa