Press Tatalaina Nofofua

Faamatalaga puupuu:

Carbon Steel Belts for wood based panel press | Continuous single opening press


  • Fusi Talosaga: vaega Wood faavae
  • Ituaiga o Press: Press Tatalaina Nofofua pea
  • Steel fusi: CT1300 / DT1320
  • Ituaiga Steel: Steel carbon
  • Malosi Tensile: 1250/1340 faasao
  • Vaivai Malosi: ± 430 / ± 410 N / mm2
  • Maaa: 360 / tusa ma le 380 HV5
  • Faamatalaga oloa

    Datasheets

    Uamea fusi MO Wood ALAMANUIA vaega faavae | Fetaomi Amata Nofofua

    Mingke Steel Belts can be applied to wood based panel (WBP) industry for continuous presses to produce Medium Density Fiberboard (MDF), High Density Fiberboard (HDF), Particle Board (PB), Chipboard, Oriented Structural Board (OSB), Laminated Veneer Lumber (LVL), etc.

    Single Opening Press is an old-fashioned design, using a carbon steel belt with a thickness of 1.2 ~ 1.5mm, which has good thermal conductivity and low cost. Mingke carbon steel belt that used in single opening press line has a service life of more than 10 years.

    I alamanuia vaega laau faavae, e tolu ituaiga o masini faifai pea :

    ●   Faalua fusi Press, e matele maua MDF / HDF / PB / OSB / LVL / ...

    ●   Mende Press (lea ua lauiloa foi o Calender), e matele maua MDF manifinifi.

    ●   Single Opening Press, mainly produce PB/OSB.

    i le lalolagi atoa, o le gaosi fetaomi pea lauiloa o le:

    ● SIEMPELKAMP, mai Siamani

    ● DIEFFENBACHER, mai Siamani

    ● DIEFFENBACHER-SWPM, mai Saina

    ● FOMA, mai Saina

    ● BINOS, mai Siamani

    ● IMAL uo, mai Italia

    Fusipaʻu talafeagai Steel:

    faʻataʻitaʻiga Ituaiga o fusi Ituaiga o fetaomi
    ●   MT1650 Martensitic Stainless fusi Steel Double belt press, Mende press
    ●   MT1500 Martensitic Stainless fusi Steel Double belt press, Mende press
    ●   CT1300 Faamaaa ma agamalu uamea carbon fetaomi amata Nofofua
    ●   DT1320 uamea carbon vaega lua (isi e CT1300) fetaomi amata Nofofua

    Tuuina Aotelega o le fusipaʻu:

    faʻataʻitaʻiga umi lautele mafia
    ●   MT1650 ≤150 m / pc 1400 ~ 3100 mm 2.3 / 2.7 / 3.0 / 3.5mm
    ●   MT1500 2.3 / 2.7 / 3.0 / 3.5mm
    ●   CT1300 1.2 / 1.4 / 1.5 mm
    ●   DT1320 1.2 / 1.4 / 1.5 mm

     


  • Talu:
  • Sosoo ai:

  • ● Datasheet _ MT1650 Stainless Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ MT1500 Stainless Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ MT1050 Stainless Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ AT1200 Stainless Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ AT1000 Stainless Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ CT1300 Carbon Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ CT1100 Carbon Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ DT1320 Carbon Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ DT980 Stainless Steel Belt  ☚ kiliki e sii maia

    Tusi lau savali iinei ma auina mai ia i tatou