Fusi Faalua Press

Faamatalaga puupuu:

Stainless Steel Belt for wood based panel press | continuous double belt press.


  • Fusi Talosaga: Alamanuia vaega Wood faavae
  • Ituaiga o Press: fusi Faalua pea Press
  • Steel fusi: MT1650
  • Ituaiga Steel: Steel Stainless
  • Malosi Tensile: 1600 faasao
  • Vaivai Malosi: ± 630 N / mm2
  • Maaa: 480 HV5
  • Faamatalaga oloa

    Datasheets

    Uamea fusi MO Wood ALAMANUIA vaega faavae | Fetaomi fusi faaluaina

    Mingke Steel Belts can be applied to wood based panel (WBP) industry for continuous presses to produce Medium Density Fiberboard (MDF), High Density Fiberboard (HDF), Particle Board (PB), Chipboard, Oriented Structural Board (OSB), Laminated Veneer Lumber (LVL), etc.

    The continuous double belt press consists of upper & lower 2 pieces of steel belts, which is the latest wood-based panel press system, and major press manufacturers around the world are still constantly optimizing and upgrading this press.

    The thickness of double belt press steel belt generally has 4 sizes of 2.3 / 2.7 / 3.0 / 3.5mm, which has high cost. The life time of steel belt is about 5-15 years according to different thickness panels and different material boards.

    Mingke provides MT1650 stainless steel belt for double belt press line, which is the optimal strength steel belt.

    I alamanuia vaega laau faavae, e tolu ituaiga o masini faifai pea :

    ●  Faalua fusi Press, e matele maua MDF / HDF / PB / OSB / LVL / ...

    ●  tagata de Press (lea ua lauiloa foi o Calender) , m ainl y maua manifinifi MDF.

    ●  Single Opening Press, mainly produce PB/OSB.

    i le lalolagi atoa, o le gaosi fetaomi pea lauiloa o le:

    ● SIEMPELKAMP, mai Siamani

    ● DIEFFENBACHER, mai Siamani

    ● DIEFFENBACHER-SWPM, mai Saina

    ● FOMA, mai Saina

    ● BINOS, mai Siamani

    ● IMAL uo, mai Italia

    Fusipaʻu talafeagai Steel:

    faʻataʻitaʻiga Ituaiga o fusi Ituaiga o fetaomi
    ●   MT1650 Martensitic Stainless fusi Steel Double belt press, Mende press
    ●   MT1500 Martensitic Stainless fusi Steel Double belt press, Mende press
    ●   CT1300 Faamaaa ma agamalu uamea carbon fetaomi amata Nofofua
    ●   DT1320 uamea carbon vaega lua (isi e CT1300) fetaomi amata Nofofua

    Tuuina Aotelega o le fusipaʻu:

    faʻataʻitaʻiga umi lautele mafia
    ●   MT1650 ≤150 m / pc 1400 ~ 3100 mm 2.3 / 2.7 / 3.0 / 3.5mm
    ●   MT1500 2.3 / 2.7 / 3.0 / 3.5mm
    ●   CT1300 1.2 / 1.4 / 1.5 mm
    ●   DT1320 1.2 / 1.4 / 1.5 mm

     


  • Talu:
  • Sosoo ai:

  • ● Datasheet _ MT1650 Stainless Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ MT1500 Stainless Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ MT1050 Stainless Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ AT1200 Stainless Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ AT1000 Stainless Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ CT1300 Carbon Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ CT1100 Carbon Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ DT1320 Carbon Steel Belt  ☚ kiliki e sii maia

    ● Datasheet _ DT980 Stainless Steel Belt  ☚ kiliki e sii maia

    Tusi lau savali iinei ma auina mai ia i tatou