Single mmepe Press

Short Description:

Carbon Steel Belts for wood based panel press | Continuous single opening press


  • Ájị Ngwa: Wood Dabere Panel
  • Ụdị Press: Ịga n'ihu Single mmepe Press
  • Steel echebe: CT1300 / DT1320
  • Steel Type: Carbon Steel
  • Ike ọdụdọ: 1250/1340 Mpa
  • Ike ọgwụgwụ Ike: ± 430 / ± 410 N / mm2
  • Ekweghị ekwe: 360/380 HV5
  • Product Ihe

    Datasheets

    Steel ájị osisi dabeere Panel ụlọ ọrụ | SINGLE oghere AKUKO

    Mingke Steel Belts can be applied to wood based panel (WBP) industry for continuous presses to produce Medium Density Fiberboard (MDF), High Density Fiberboard (HDF), Particle Board (PB), Chipboard, Oriented Structural Board (OSB), Laminated Veneer Lumber (LVL), etc.

    Single Opening Press is an old-fashioned design, using a carbon steel belt with a thickness of 1.2 ~ 1.5mm, which has good thermal conductivity and low cost. Mingke carbon steel belt that used in single opening press line has a service life of more than 10 years.

    Na osisi dabeere panel ụlọ ọrụ, e nwere atọ ụdị nke na-aga n'ihu presses :

    ●   Ugboro abụọ echebe Press, tumadi na-emepụta MDF / HDF / PB / OSB / LVL / ...

    ●   Mende Press (nke a makwaara dị ka calender), tumadi na-emepụta mkpa MDF.

    ●   Single Opening Press, mainly produce PB/OSB.

    All gburugburu ụwa, ndị a ma ama na-aga n'ihu pịa emepụta bụ:

    ● SIEMPELKAMP, si Germany

    ● DIEFFENBACHER, si Germany

    ● DIEFFENBACHER-SWPM, si China

    ● FOMA, si China

    ● BINOS, si Germany

    ● IMAL PAL, si Italy

    Na ọdabara Steel eriri:

    model Ụdị belt Ụdị pịa
    ●   MT1650 Martensitic igwe anaghị agba nchara echebe Mmadụ Double belt press, Mende press
    ●   MT1500 Martensitic igwe anaghị agba nchara echebe Mmadụ Double belt press, Mende press
    ●   CT1300 Obi tara mmiri na n'obi carbon ígwè Single oghere pịa
    ●   DT1320 Dual adọ carbon ígwè (ọzọ ka CT1300) Single oghere pịa

    Ezitekwara Akporo nke eriri:

    model ogologo obosara ọkpụrụkpụ
    ●   MT1650 ≤150 m / pc 1400 ~ 3100 mm 2.3 / 2.7 / 3.0 / 3.5mm
    ●   MT1500 2.3 / 2.7 / 3.0 / 3.5mm
    ●   CT1300 1.2 / 1.4 / 1.5 mm
    ●   DT1320 1.2 / 1.4 / 1.5 mm

     


  • Previous:
  • Next:

  • ● Datasheet _ MT1650 Stainless Steel Belt  ☚ pịa ibudata

    ● Datasheet _ MT1500 Stainless Steel Belt  ☚ pịa ibudata

    ● Datasheet _ MT1050 Stainless Steel Belt  ☚ pịa ibudata

    ● Datasheet _ AT1200 Stainless Steel Belt  ☚ pịa ibudata

    ● Datasheet _ AT1000 Stainless Steel Belt  ☚ pịa ibudata

    ● Datasheet _ CT1300 Carbon Steel Belt  ☚ pịa ibudata

    ● Datasheet _ CT1100 Carbon Steel Belt  ☚ pịa ibudata

    ● Datasheet _ DT1320 Carbon Steel Belt  ☚ pịa ibudata

    ● Datasheet _ DT980 Stainless Steel Belt  ☚ pịa ibudata

    Dee ozi gị ebe a na-ezite ya anyị