Tib Qhib Xovxwm

Luv hauj lwm:

Carbon Steel Belts for wood based panel press | Continuous single opening press


  • Siv Daim Ntawv Thov: Ntoo Based Vaj Huam Sib Luag
  • Hom Xovxwm: Nruam Tib Qhib Xovxwm
  • Steel Siv: CT1300 / DT1320
  • Steel hom: Carbon Steel
  • Tensile zog: 1250/1340 Mpa
  • Nkees nkees zog: ± 430 / ± 410 N / mm2
  • Hardness: 360/380 HV5
  • khoom Nthuav dav

    datasheets

    STEEL SIV RAU WOOD RAWS LI VAJ HUAM SIB LUAG LAG LUAM | IB QHIB XOVXWM

    Mingke Steel Belts can be applied to wood based panel (WBP) industry for continuous presses to produce Medium Density Fiberboard (MDF), High Density Fiberboard (HDF), Particle Board (PB), Chipboard, Oriented Structural Board (OSB), Laminated Veneer Lumber (LVL), etc.

    Single Opening Press is an old-fashioned design, using a carbon steel belt with a thickness of 1.2 ~ 1.5mm, which has good thermal conductivity and low cost. Mingke carbon steel belt that used in single opening press line has a service life of more than 10 years.

    Nyob rau hauv cov ntoo raws li vaj huam sib luag kev lag luam, muaj peb hom nruam presses :

    ●   Muab Siv xovxwm Hydraulic, mas tsim MDF / HDF / PB / OSB / lvl / ...

    ●   Mende Xovxwm (uas kuj hu ua calender), mas tsim nyias MDF.

    ●   Single Opening Press, mainly produce PB/OSB.

    Tag nrho cov nyob ib ncig ntawm lub ntiaj teb no, tus naas ej nruam xovxwm manufacturers yog:

    ● SIEMPELKAMP, los ntawm lub teb chaws Yelemees

    ● DIEFFENBACHER, los ntawm lub teb chaws Yelemees

    ● DIEFFENBACHER-SWPM, los ntawm Tuam Tshoj

    ● FOMA, los ntawm Tuam Tshoj

    ● BINOS, los ntawm lub teb chaws Yelemees

    ● IMAL NPAWG, los ntawm ltalis

    Ii Steel menyuam:

    Model Hom siv Hom xovxwm
    ●   MT1650 Martensitic Hlau Stainless Siv Double belt press, Mende press
    ●   MT1500 Martensitic Hlau Stainless Siv Double belt press, Mende press
    ●   CT1300 Hardened thiab tempered carbon steel Tib qhib xovxwm
    ●   DT1320 Dual theem carbon steel (lwm txoj rau CT1300) Tib qhib xovxwm

    Muab Scope ntawm cov menyuam:

    Model Length Dav thickness
    ●   MT1650 ≤150 m / pc 1400 ~ 3100 hli 2.3 / 2.7 / 3.0 / hli 3.5
    ●   MT1500 2.3 / 2.7 / 3.0 / hli 3.5
    ●   CT1300 1.2 / 1.4 / 1.5 hli
    ●   DT1320 1.2 / 1.4 / 1.5 hli

     


  • Yav dhau los:
  • Tom ntej:

  • ● Datasheet _ MT1650 Stainless Steel Belt  ☚ nias mus download tau

    ● Datasheet _ MT1500 Stainless Steel Belt  ☚ nias mus download tau

    ● Datasheet _ MT1050 Stainless Steel Belt  ☚ nias mus download tau

    ● Datasheet _ AT1200 Stainless Steel Belt  ☚ nias mus download tau

    ● Datasheet _ AT1000 Stainless Steel Belt  ☚ nias mus download tau

    ● Datasheet _ CT1300 Carbon Steel Belt  ☚ nias mus download tau

    ● Datasheet _ CT1100 Carbon Steel Belt  ☚ nias mus download tau

    ● Datasheet _ DT1320 Carbon Steel Belt  ☚ nias mus download tau

    ● Datasheet _ DT980 Stainless Steel Belt  ☚ nias mus download tau

    Sau koj cov lus no thiab xa nws mus rau peb