Press Agor Sengl

Disgrifiad byr:

Carbon Steel Belts for wood based panel press | Continuous single opening press


  • Belt Cais: Panel Seiliedig Wood
  • Math o Wasg: Parhaus Press Agor Sengl
  • Steel Belt: CT1300 / DT1320
  • Math Steel: Carbon Steel
  • Cryfder tynnol: 1250/1340 ACM
  • Cryfder Blinder: ± 430 / ± 410 N / mm2
  • Caledwch: 360/380 HV5
  • Manylion cynnyrch

    taflenni data

    STEEL BELT GYFER WOOD DIWYDIANT PANEL YN SEILIEDIG | WASG AGOR SENGL

    Mingke Steel Belts can be applied to wood based panel (WBP) industry for continuous presses to produce Medium Density Fiberboard (MDF), High Density Fiberboard (HDF), Particle Board (PB), Chipboard, Oriented Structural Board (OSB), Laminated Veneer Lumber (LVL), etc.

    Single Opening Press is an old-fashioned design, using a carbon steel belt with a thickness of 1.2 ~ 1.5mm, which has good thermal conductivity and low cost. Mingke carbon steel belt that used in single opening press line has a service life of more than 10 years.

    Mewn diwydiant panel seiliedig ar goed, mae tri math o gweisg parhaus :

    ●   Dwbl Belt Press, yn bennaf yn cynhyrchu MDF / HDF / PB / OSB / lvl / ...

    ●   Mende Press (sy'n cael ei adnabod hefyd fel Calendr), yn bennaf yn cynhyrchu MDF tenau.

    ●   Single Opening Press, mainly produce PB/OSB.

    O gwmpas y byd, y gwneuthurwyr wasg parhaus enwog yw:

    ● SIEMPELKAMP, o'r Almaen

    ● DIEFFENBACHER, o'r Almaen

    ● DIEFFENBACHER-SWPM, o China

    ● Foma, o China

    ● BINOS, o'r Almaen

    ● PAL IMAL, o'r Eidal

    Gwregysau Steel Berthnasol:

    model Math o gwregys Math o wasg
    ●   MT1650 Martensitic Dur Di-staen Belt Double belt press, Mende press
    ●   MT1500 Martensitic Dur Di-staen Belt Double belt press, Mende press
    ●   CT1300 Caledu a dymheru dur carbon wasg agor Sengl
    ●   DT1320 dur carbon cam deuol (dewis arall i CT1300) wasg agor Sengl

    Cyflenwad Cwmpas y Gwregysau:

    model hyd lled trwch
    ●   MT1650 ≤150 m / pc 1400 ~ 3100 mm 2.3 / 2.7 / 3.0 / 3.5mm
    ●   MT1500 2.3 / 2.7 / 3.0 / 3.5mm
    ●   CT1300 1.2 / 1.4 / 1.5 mm
    ●   DT1320 1.2 / 1.4 / 1.5 mm

     


  • Blaenorol:
  • Nesaf:

  • ● Datasheet _ MT1650 Stainless Steel Belt  ☚ glicio i lawrlwytho

    ● Datasheet _ MT1500 Stainless Steel Belt  ☚ glicio i lawrlwytho

    ● Datasheet _ MT1050 Stainless Steel Belt  ☚ glicio i lawrlwytho

    ● Datasheet _ AT1200 Stainless Steel Belt  ☚ glicio i lawrlwytho

    ● Datasheet _ AT1000 Stainless Steel Belt  ☚ glicio i lawrlwytho

    ● Datasheet _ CT1300 Carbon Steel Belt  ☚ glicio i lawrlwytho

    ● Datasheet _ CT1100 Carbon Steel Belt  ☚ glicio i lawrlwytho

    ● Datasheet _ DT1320 Carbon Steel Belt  ☚ glicio i lawrlwytho

    ● Datasheet _ DT980 Stainless Steel Belt  ☚ glicio i lawrlwytho

    Ysgrifennwch eich neges yma ac anfon atom