Single Opening Press

Short Description:

Carbon Steel Belts for wood based panel press | Continuous single opening press


  • Belt Application: Wood Based Panel
  • Type of Press: Continuous Single Opening Press
  • Steel Belt: CT1300 / DT1320
  • Steel Type: Carbon Steel
  • Tensile Strength: 1250 / 1340 Mpa
  • Fatigue Strength: ±430 / ±410 N/mm2
  • Hardness: 360 / 380 HV5
  • Product Detail

    Datasheets

    STEEL BELT FOR WOOD BASED PANEL INDUSTRY | SINGLE OPENING PRESS

    Mingke Steel Belts can be applied to wood based panel (WBP) industry for continuous presses to produce Medium Density Fiberboard (MDF), High Density Fiberboard (HDF), Particle Board (PB), Chipboard, Oriented Structural Board (OSB), Laminated Veneer Lumber (LVL), etc.

    Single Opening Press is an old-fashioned design, using a carbon steel belt with a thickness of 1.2 ~ 1.5mm, which has good thermal conductivity and low cost. Mingke carbon steel belt that used in single opening press line has a service life of more than 10 years.

    In wood based panel industry, there are three types of continuous presses:

    ●  Double Belt Press, mainly produce MDF/HDF/PB/OSB/LVL/…

    ●  Mende Press (which is also known as Calender), mainly produce thin MDF.

    ●  Single Opening Press, mainly produce PB/OSB.

    All around the world, the famous continuous press manufacturers are:

    ●  SIEMPELKAMP, from Germany

    ●  DIEFFENBACHER, from Germany

    ●  DIEFFENBACHER-SWPM, from China

    ●  FOMA, from China

    ●  BINOS, from Germany

    ●  IMAL PAL, from Italy

    Applicable Steel Belts:

    Model Type of belt Type of press
    ●  MT1650 Martensitic Stainless Steel Belt Double belt press, Mende press
    ●  MT1500 Martensitic Stainless Steel Belt Double belt press, Mende press
    ●  CT1300 Hardened and tempered carbon steel Single opening press
    ●  DT1320 Dual phase carbon steel (alternative to CT1300) Single opening press

    Supply Scope of the Belts:

    Model Length Width Thickness
    ●  MT1650 ≤150 m/pc 1400~3100 mm 2.3 / 2.7 / 3.0 / 3.5mm
    ●  MT1500 2.3 / 2.7 / 3.0 / 3.5mm
    ●  CT1300 1.2 / 1.4 / 1.5 mm
    ●  DT1320 1.2 / 1.4 / 1.5 mm

     


  • Previous:
  • Next:

  • ● Datasheet _ MT1650 Stainless Steel Belt  ☚ click to download

    ● Datasheet _ MT1500 Stainless Steel Belt  ☚ click to download

    ● Datasheet _ MT1050 Stainless Steel Belt  ☚ click to download

    ● Datasheet _ AT1200 Stainless Steel Belt  ☚ click to download

    ● Datasheet _ AT1000 Stainless Steel Belt  ☚ click to download

    ● Datasheet _ CT1300 Carbon Steel Belt  ☚ click to download

    ● Datasheet _ CT1100 Carbon Steel Belt  ☚ click to download

    ● Datasheet _ DT1320 Carbon Steel Belt  ☚ click to download

    ● Datasheet _ DT980 Stainless Steel Belt  ☚ click to download

    Write your message here and send it to us