Double Belt Press

Short Description:

Stainless Steel Belt for wood based panel press | continuous double belt press.


  • Belt Application: Wood Based Panel Industry
  • Type of Press: Continuous Double Belt Press
  • Steel Belt: MT1650
  • Steel Type: Stainless Steel
  • Tensile Strength: 1600 Mpa
  • Fatigue Strength: ±630 N/mm2
  • Hardness: 480 HV5
  • Product Detail

    Datasheets

    STEEL BELT FOR WOOD BASED PANEL INDUSTRY | DOUBLE BELT PRESS

    Mingke Steel Belts can be applied to wood based panel (WBP) industry for continuous presses to produce Medium Density Fiberboard (MDF), High Density Fiberboard (HDF), Particle Board (PB), Chipboard, Oriented Structural Board (OSB), Laminated Veneer Lumber (LVL), etc.

    The continuous double belt press consists of upper & lower 2 pieces of steel belts, which is the latest wood-based panel press system, and major press manufacturers around the world are still constantly optimizing and upgrading this press.

    The thickness of double belt press steel belt generally has 4 sizes of 2.3 / 2.7 / 3.0 / 3.5mm, which has high cost. The life time of steel belt is about 5-15 years according to different thickness panels and different material boards.

    Mingke provides MT1650 stainless steel belt for double belt press line, which is the optimal strength steel belt.

    In wood based panel industry, there are three types of continuous presses:

    ●  Double Belt Press, mainly produce MDF/HDF/PB/OSB/LVL/…

    ●  Mende Press (which is also known as Calender), mainly produce thin MDF.

    ●  Single Opening Press, mainly produce PB/OSB.

    All around the world, the famous continuous press manufacturers are:

    ●  SIEMPELKAMP, from Germany

    ●  DIEFFENBACHER, from Germany

    ●  DIEFFENBACHER-SWPM, from China

    ●  FOMA, from China

    ●  BINOS, from Germany

    ●  IMAL PAL, from Italy

    Applicable Steel Belts:

    Model Type of belt Type of press
    ●  MT1650 Martensitic Stainless Steel Belt Double belt press, Mende press
    ●  MT1500 Martensitic Stainless Steel Belt Double belt press, Mende press
    ●  CT1300 Hardened and tempered carbon steel Single opening press
    ●  DT1320 Dual phase carbon steel (alternative to CT1300) Single opening press

    Supply Scope of the Belts:

    Model Length Width Thickness
    ●  MT1650 ≤150 m/pc 1400~3100 mm 2.3 / 2.7 / 3.0 / 3.5mm
    ●  MT1500 2.3 / 2.7 / 3.0 / 3.5mm
    ●  CT1300 1.2 / 1.4 / 1.5 mm
    ●  DT1320 1.2 / 1.4 / 1.5 mm

     


  • Previous:
  • Next:

  • ● Datasheet _ MT1650 Stainless Steel Belt  ☚ click to download

    ● Datasheet _ MT1500 Stainless Steel Belt  ☚ click to download

    ● Datasheet _ MT1050 Stainless Steel Belt  ☚ click to download

    ● Datasheet _ AT1200 Stainless Steel Belt  ☚ click to download

    ● Datasheet _ AT1000 Stainless Steel Belt  ☚ click to download

    ● Datasheet _ CT1300 Carbon Steel Belt  ☚ click to download

    ● Datasheet _ CT1100 Carbon Steel Belt  ☚ click to download

    ● Datasheet _ DT1320 Carbon Steel Belt  ☚ click to download

    ● Datasheet _ DT980 Stainless Steel Belt  ☚ click to download

    Write your message here and send it to us